Suppose you are all ready and riding to your friend’s house but then suddenly the message ‘Tire Pressure Sensor Fault’ pops up on your dashboard or the warning light turns on. Now, come to think about it, what exactly this means, and how to get rid of it?
Maybe your truck wheel has low pressure or memory loss that causes the tire pressure sensor fault f150. Perhaps the faulty part is damaged or needs a replacement that indicates your truck error code.
So, you are all frustrated and looking crazily for the solution to this problem but could able to find out why it’s showing this message.
For that reason, we have gone through a study to give you the proper way out of this struggle. In this guide, you’ll know why this fault message is showing and how you can fix it. Ready!
Exploring Tire Pressure Sensor Fault F150 – Causes & Fixes
Having an error code or warning light illuminate when driving is basically happened due to a faulty f150 tire pressure sensor? Its fixing is easy by doing 2 methods with the right tool. Let’s see how to solve it.
|Reasons Why Tire Pressure Sensor Is Faulty||Easy Fixes That Help|
|Memory lost issue||Reset the tire pressure sensor using a scanner tool|
|Loosen wires issue||Tighten it well|
You want to get rid of the TPMS fault as fast as possible. Before that, you should know about its causes and problems too. If you ever find the issue of bad performance, high or low air pressure, and battery drainage, then it’s maybe the tire pressure sensor trouble.
According to REDI-Sensor,
The Tire Pressure Monitoring System that alerts you when one of your tires is dangerously low on air usually relies on TPMS sensors in the tires to tell the system the tire pressure is low. Most TPMS sensors run on batteries that are built into the sensor and these batteries are not replaceable.
So, how to fix tire pressure sensor fault in your f150? You have 2 options that work like magic to treat the troubles. And, these are:
- Reprogram the tire pressure sensor with a scan tool.
- Change the bad one.
The Right Way Of Ford F150 Tire Pressure Sensor Fault Reset
If your truck’s wheels have low pressure and showing the error code on the dash, it could be the problem of an unstable tire pressure sensor on f150. These types of issues are shown due to memory loss in the unit system.
In order to reset it, you want to get a good scanner tool such as FORScan. Be sure to check how to use FORScan f150 truck if you don’t have any ideas. Also, be sure to carry the vehicle owner manual to do the process rightly. Take a look and apply these steps:
Step 1: Test Tire Pressure
Start by checking all the tire pressure. Also, don’t forget to test the gauge of them. To do it rightly, check the tire label to know the right pressure level easily.
Step 2: Connect A Scanner Tool In Your Truck
Next, use a scanner tool or laptop with an OBD II adapter to run FORScan software. Connect everything to its place to access the system and be sure to read the user manual.
Step 3: Read Fault Codes
After connecting the scanner tool, then wait for a while to access your truck system. If you are using a laptop and OBD II adapter, then run the FORScan app. Then, you’ll get a warning note that tells you to fix the trouble code.
Step 4: Reprogram Tire Pressure Sensors
Now, you need to reset the trouble code of the TPMS control module. Just click on the warning error code and press the start button to reprogram it.
Then, you’ll find a message to turn off the ignition and then start it over after waiting for a minute. If you don’t have a scanner tool, do the following actions:
- Turn on your truck in an idle position without starting the engine.
- Then, turn on the hazard flashers. It should flash 3 times for 10 seconds.
- If your truck makes a beeping noise, then it means a complete reset.
Addition Reset Methods
Disable and reconnect the battery to troubleshot the truck’s TPMS system.
- Remove the positive battery cable.
- And then, honk the truck for a few seconds.
- Next, connect the positive battery cable to its place.
- Check the dashboard to see if things sort out or not.
Pro Tips: Drive the truck 32 km/h for a couple of minutes before resetting the TPMS control module. Plus, place f150 in a safe place and change the gear to turn off the engine.
Wobbly Wires Might Be Causing The F150 Tire Pressure Sensor Fault
A lot of ford f150 drivers find themselves dumb while finding the real reason behind the issue of the TPMS system is because of the shaky wires. For that, follow the instructions:
- Open the glove box by opening the 4 corners with a ratchet wrench. It’ll be next to the screen if you don’t know.
- After that, locate the wires of the tire pressure module. They would be on the passenger’s side of the glove box. To know the location better, look into the manual.
- Next, if the wires are loosened up, then tighten them out. And then, check the dash to confirm success.
This May Help You Too!
Frequently Asked Questions (FAQs)
is it safe to drive with a tire pressure sensor fault?
Is it illegal to remove tire pressure sensor?
How much does it cost to replace the tire pressure sensor?
What is the life expectancy of a tire pressure sensor?
Now that you have learned all the solutions of tire pressure sensor fault f150, try them out to solve the issue. As an owner of a truck, pick the right method based on the problems you are having. Also, it’ll need expense and gear to solve at ease.
Yet, if you find it hard to do and have money in your pocket, then choose a good repair shop to solve the problem. Don’t waste your time by going to a shady place when thinking of tire pressure sensor issues.
Be sure to locate the symptoms first before doing any changes to your truck’s system. Hope you find this guide useful to treat the challenges of the faulty tire pressure sensor. Have A Great Day!
More To Read:
Ah! Driving your King has no twist when you have zero knowledge! Yes, Noah is here with his core experiences about trucks, cars, suvs and atvs. Working as a cheif editor for Automasterx to make you satisfied with solid data driven post.