Do you know what Subaru’s remote start system is? It is the heart of the process of getting your Subaru to run smoothly. All the parts of Subaru OEM are connected through a remote start system. The remote start system is what allows your car to start with just the push of a button.
It’s also great for long-distance road trips or those who are on a tight budget. If you’re looking to get your Subaru started on the right track, this article on Subaru OEM Remote Start Install will help you get there.
Table Of Contents
- 1 Subaru OEM Remote Start Install
- 2 How To Install Subaru Remote start
- 3 This Video Will Help You Too!
- 4 Frequently Asked Questions (FAQs)
- 5 Final Verdict
Subaru OEM Remote Start Install
The remote start system is connected to the engine and exhaust, so it’s essential to make sure they are connected before starting your car. Otherwise, the system won’t work properly.
There are a few ways to install a Subaru OEM Remote Start. There are two ways to go about this: dihedral or hexagonal.
Now you may wonder, “can Subaru install remote start”? Both of these routes work, but the dihedral method is the easiest to get your car to start.
If you’re unable to get your Subaru to start on the first try, or if you just want to get it running a little faster, the hexagonal method is the way to go. Let’s get to know how one can install Subaru remote start.
How To Install Subaru Remote start
Now, before we get into the ways and mediums of installing remote start on your car, let’s get to know this out of the way. The first thing you have to do is get your key FOB or spare key. Then, do as follows-
Remove the fuse box
Now, be ready to disassemble the vehicle parts underneath the steering wheel. Yes, you need to get access to the fuse box under the steering wheel.
For this, remove the cover by removing the crown bolts one by one from underneath the steering system. Be sure to release all the plugs to take out the cover easily.
Connect the Remort Start System Wires
For your help, let’s help you with the wire colors-
|White with black & White with Red||2 Starter wires (can vary model to model)|
|Black with white stripe||Parking light|
Finally, have a test start must before you start your car. And don’t forget to connect the anti-theft wire right around the ignition. And then, load the key in the smart start box.
Reassemble All the Wires & Close the Fuse Box
Now, reassemble all the wires and close the fuse box.
This is how you can Subaru OEM remote start install. It is what we refer to as a “Quick Start”. It takes only a few minutes to complete and start your car.
If you’re not feeling particularly hands-on with the car, that’s okay. You can still do it, and it’ll work just fine. The only real difference is that you’ll probably start a little faster.
This Video Will Help You Too!
Frequently Asked Questions (FAQs)
Can you add remote start to a Subaru?
Yes, you can add remote start to a Subaru by following these steps. Make sure your Subaru is registered with the dealership. Check out the Subaru dealer website and click the “Registrar” link. When you’re at the “Registration” page, scroll down to the “New Car” section and select “Conventional”. Then, pay attention to the information on the paper speed and gear shift stick, poi, and rev counter. Make sure these items match the information you find on the Subaru dealer website. That’s important because if these details don’t match, you won’t be able to start your Subaru.
How do I know if my Subaru has a remote start?
First, check if the Subaru car has a remote start function. As soon as you start the car and see the light in the garage switch on the remote start light, you need to find out if it has a remote start mode. If it doesn’t have a remote start feature, then change the wires on the back of the car to electrify them and you will be all set. This is the only way to get the remote start function in the first place.
Subaru remote start installation cost?
When you order a remote start system for your car, this is usually around $100-150, depending on the amount of shipping and handling charge. The total cost of a remote start system can vary depending on where you buy it. But you’re likely to pay between $1,500 and $2,500 for a system with the manual, power pack, and remote start. If you buy it completely, you won’t have to pay a monthly fee for the right to use the system, but it will cost around $450 or less extra.
Getting your Subaru running faster and easier is essential if you want to keep it in great shape long enough to enjoy it. For that reason, Subaru OEM remote start install is just as important, and it happens much faster.
When your Subaru is ready to go on the road, you will want to start using the remote start system regularly. It’s a great way to get your car moving and make it feel better about itself. If you’re looking for a reliable car that does everything you want it to do and does it quickly, Subaru is the car with the remote start feature for you.
- Subaru Forester Key Stuck in Ignition: A Growing Issue Among Forester Owners
- How Do You Reset Hatch On Subaru Outback and Solve The Liftgate Issue?
- Why is Subaru Touch Screen Not Working? Reasons and Solutions
- Subaru No Crank No Start: 4 Reasons And Fixes Explained
- [+Solution] Subaru Not Starting Clicking Noise From Dash- See Our 6 Reasons+ Fixing!
Our chief editor, working 24/7 to ensure the precise and only quality data regarding different trucks.He is mastered with the ins and outs of cargo to off-road trucks of Dodge, Ford, Chevy, Toyota, GMC and more. This truck geek graduatedwitha Bachelor of automobile engineeringdegree and practiced through his own automotive parts repair center.