A Complete Guide to Ford F150 Power Inverter Upgrade

How to do a ford f150 power inverter upgrade? To do this, you need to install a bigger power inverter in your Ford F-150 truck. You will also need to upgrade the input wire, the output wire, and the outlet.

The power inverter upgrading task can be difficult for you if you do not know the correct process. You can overload the power inverter circuit if you install a very big power inverter that is not suitable for your truck.

And so, today, we will show you how to do the power inverter upgrade of the Ford F-150 truck. Stay tuned to know the details.

Ford F150 Power Inverter Upgrade

In the below guide, you will get details about Ford F150 power inverter up-gradation based on different years models.

2009 Ford F150 Power Inverter Upgrade

If you are thinking about whether you can upgrade your 2009 Ford F150 truck’s inverter to a 3000-watt inverter, then the answer is yes. You can install the 3000-watt inverter under the back right passenger’s seat.

To do it, you have to run a 10 gauge red wire from the truck’s battery to a 30-ampere fuse and then to a kill switch in the center of the front console.

After that, run the wire from the kill switch to a relay switch nearby to the inverter and then to the positive side of the inverter.

Finally, run the wire to the negative side of the inverter and then directly to the battery. Now, install two receptacles in the center of the front console. Plug in a twelve gauge extension cord to the inverter and run it to the two receptacles installed in the center of the front console.

2010 Ford F150 Power Inverter Upgrade

Some people have upgraded their 2010 Ford F150 truck’s power inverter to the Stanley 800 watts inverter. For this, you need to use Leviton’s snap-in receptacles. You are required to remove the faceplate from the Stanley 800 watt inverter and install it in front of the shifter.

It is a low voltage sensor, so it will not drain the truck’s battery. You can also install the inverter in the dashboard, hiding behind the ashtray.

2015 Ford F150 Power Inverter Upgrade

You might be interested in doing an f150 inverter swap on your 2015 Ford F-150 Lariat truck for a higher power inverter. In this case, you have to upgrade your alternator as higher power will dramatically decrease the life of your alternator.

Normally a 2015 Ford F-150 Lariat truck has a stock alternator that has an output of up to 200 amps. You need to have over 200 amps to upgrade to a higher power inverter.

In this case, you can also use a dual alternator setup. If you want, you can also use a second battery for the higher power inverter.

2016 Ford F150 Power Inverter Upgrade

Some people have stated that they have done their 2016 ford f150 power inverter up-gradation as they want to replace their stock power inverter with a higher quality pure sine wave inverter of a bit more power.

If you want to do this as well, you have to add new wiring to accommodate more input power on the direct current side and more output power on the alternating current side. You also need to change the fuse on the power outlets. Generally, stock power inverters have a fuse size of 20 amperes. You need to install a fuse size of 40 amperes to install the pure sine wave inverter.

2017 Ford F150 Power Inverter Upgrade

You might want to do an f150 power inverter Replacement on your 2017 Ford F-150 truck for the inverter’s power to be 1200W-2000W. You may want to do it as your little Stanley 1 gallon vacuum cleaner is not running on your truck’s power inverter. In this case, you have to follow the restrictions listed in your truck’s owner manual and check the limits of the control system and dashboard plug-in.

This is because the last thing you will want is an overload power inverter circuit. In this circumstance, you can install a second power inverter and wire it straight to the battery with the fuse right at the battery. For the 2000 watt power inverter, you will need 167 amp on the 12 volts side.

Also Read: Need Ideas on Ford 5.4 3V Performance Upgrades?

As a result, you will require a very heavy-duty cable. For doing this 2000 watt f150 power inverter install, you must redo the wiring to the inverter and upgrade the alternator and associated cables. You also may need to redo the wiring from the inverter or power plugs.

2021 Ford F150 Power Inverter Upgrade

Sometimes you may not be able to charge your Milwaukee batteries from your 2021 Ford Tremor F-150 truck’s power inverter. You may want to upgrade it to a higher power pure sine wave inverter of 2000 watts.

To do this, firstly, you have to remove the dashboard of your truck.

Now, you need to install the 2000 watts power inverter. Install 4 gauge wires or 2/0 gauge battery cable wires with the inverter.

Finally, reinstall the dashboard to complete the 2021 f150 power inverter up-gradation.

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

Conclusion

Many people find it tough to properly do a power inverter up-gradation in their Ford F150 truck. Sometimes they face an accident as incorrect up-gradation can crash the inverter and cause a fire. To make sure that you do not face such accidents, you need to know how to do a ford f150 power inverter upgrade properly.

To know that, in this article, we have discussed how to do a ford f150 power inverter up-gradation based on different years’ models. We are hopeful that you can do the power inverter up-gradation task on your Ford F150 truck easily after reading this article.

You Can Also Read:

• Dodge Dakota Interchangeable Years for Better Upgrades!
• The Best 2015 F150 Interior Upgrades to Get in 2022
• Willing To F150 Seat Swap? Explore Our Experts Guide Now!