How To Fix Subaru Outback Backup Camera Not Working

Does your Subaru Outback backup camera not work? One of the most common causes of Subaru Outback backup camera not working is a faulty backup camera.

The backup camera can be defective if it is not connecting to the car’s electrical system and the power supply is not flowing through it. Furthermore, there may be many reasons why your Subaru outback camera is not working correctly.

Either you can find a solution on your own or request a recall from Subaru to fix the problem. So, what are you waiting for? Check out this article on why your Subaru Outback backup camera is not working and how you can fix it.

Table of Contents show

Reasons Why Subaru Outback Backup Camera Not Working

Let’s help you with a quick table to know all the reasons at once and possible fixes to try.

Reasons	Probable Solutions
faulty backup camera	replace the backup camera
Broken, loose, or corroded wires	replace any damaged cables or connections
backup camera is not moving	Check it and unplug
Camera sensor not working	Check the sensor and unplug
Blown-up backup camera or monitor fuse	Replace the fuse
Headunit isn’t processing the input signal	Reboot the head unit

In the guide below, you will also find out the reasons and their solutions in detail behind the Subaru outback reverse camera not working.

Faulty Backup Camera

We have found that many people who have the 2011 Subaru outback car have complained. They get blue screens with the grid outlined momentarily from their backup camera when in reverse. They also don’t get any images from their backup camera. This problem happens because of a faulty backup camera. The backup camera can contact faulty if it is damaged by water as this part is not waterproof.

Solution: To solve the issue of the 2011 Subaru outback backup camera not working, you have to replace the faulty backup camera. You might need to disassemble the entire tailgate of your car to replace the backup camera.

Broken, Loose, Or Corroded Wires

When you face the 2013 Subaru outback backup camera not working issue, the leading cause is broken, loose or corroded wires inside the rear hatch interior trim. As a result, you will get a black screen and no images from your backup camera.

Solution: To solve this 2013 Subaru outback reverse camera not working you should cautiously unplug the rubber sleeves between the body and the rear hatch of your car. Then, check the wires inside, particularly where they enter or exit the sheet metal.

However, change them if you find any broken, loose or corroded wires there. You may also need to inspect the cables behind the screen of the front of your car.

The backup camera Is Not Moving

Another thing that might be preventing your backup camera from working is the fact that it’s not moving. Most backup cameras have a feature where they stay on for a certain amount of time.

Solution: If your backup camera isn’t working, you should ensure that your parking sensors function correctly. This should make your backup camera redundant. Another thing you can do is try to flip your camera’s image. This should prevent your camera from being on moving.

You should also make sure that your camera is on a setting that doesn’t allow movement. If it’s on a setting that lets you move your camera, you should ensure that it’s not moving. Also, make sure that your camera isn’t facing a direction where it will be affected by wind or debris. However, if your backup camera isn’t working, you can unplug it.

Camera Sensor Not Working

Another thing you can do if your backup camera isn’t working is to check if the sensor is working. This light on the back of your camera allows your car’s sensors to tell your car where it is.

Solution: You should also make sure that the camera is facing a direction that’s not too shaded and isn’t too close to any objects. However, if your backup camera isn’t working correctly, you should probably unplug it.

Blown-Up Backup Camera Or Monitor Fuse

It can cause the backup camera not to work on your 2017 Subaru outback car. As a result, you will not get any image from your car’s backup camera.

Solution: To solve this 2017 Subaru outback backup camera not working issue, you need to remove the blown-up fuse and replace it. Generally, you can find the fuse box underneath the steering wheel. In case you’re unsure where the fuse box is situated, check the owner’s manual.

After installing the new fuse, start your car and put it in reverse. The backup camera should function correctly this time.

Headunit Isn’t Processing The Input Signal

Sometimes, you will see that your 2012 Subaru outback backup camera suddenly goes blue and then turns off when you shift to reverse. It may also appear blurry and won’t turn on. This problem occurs when your car’s head unit isn’t processing the incoming signal from the backup camera.

Solution: In this case, reboot the head unitto solve the 2012 Subaru outback backup camera not working issue. Firstly, press and hold the power button of the head unit of your car. The display would then go into standby, but you do not let go of the power button.

After around 12-15 seconds later, you would see the screen glitch, which is when it is rebooting. You have to let go of the power button and wait for a few seconds to let it boot. Next, turn on the unit back by clicking on the power button. Finally, put your car in reverse, and your backup camera will start working now.

Frequently Asked Questions (FAQs)

Why did my backup camera suddenly stop working?

Whether it is a 2016 Subaru outback backup camera not working issue or any other Subaru outback car, a blown-up backup camera or monitor fuse is most likely the culprit. Inspect the cables and wiring from the backup camera to the display. You will probably find out why your backup camera suddenly stops working.

How do you turn on the backup camera on a Subaru Outback?

To turn on the backup camera on a Subaru Outback car, you only need to press the power button of the backup camera. Meanwhile, you will find the power button on the head unit of your Subaru Outback car.

How do I know if my backup camera is bad?

Suppose the head unit displays your carloads, but the backup camera shows no image. In that case, it is most likely that your backup camera is terrible. Also, if the backup camera goes blue or blurry and then turns off while you put the car in reverse, your backup camera is awful.

Conclusion

No matter which model of the Subaru outback car’s backup camera is not working for you, it is vital to fix it. If you don’t fix the backup camera not working problem, you might face serious issues like an accident. Thus, it is a little difficult task to improve, and you might be eager to know how to fix the Subaru backup camera not working.

To know that, you should check this article. After reading it, we are hopeful that you can now efficiently fix the Subaru outback backup camera not working problem.

You Can Also Read:

How To Fix Subaru Outback Backup Camera Not Working