How Much Does A Chevy 6.0 Oil Pump Replacement Cost?

If you are in search of how much does it cost to replace the oil pump on a 6.0 Chevy engine? The overall cost of a chevy oil pump on 6.0 is between $600-$1200.This cost also increases when the estimated labor expenses are added to it. The labor expenses may rise to $627 or more.

A Chevy 6.0 oil pump replacement cost varies from its model in some cases. However, in most cases, you can’t predict the sudden ups and downs of cost. Some essential matters also impact the total cost of oil pump replacement.

It also depends on how often you use the oil pump on your vehicles. Let’s see some more about these facts, which we’ll reveal in-depth below.

An Overview On Chevy 6.0 Oil Pump Replacement Cost

The average cost of a Chevy 6.0 oil pump will range up to $300-$1000. Although this is not a fixed price, several factors influenced the total expenditure of changing the oil pump.

In some cases, the cost to replace a Chevy 6.0 oil pump may rise to $1300, depending on the years and models. For instance, you can see the chart below, which may help you break all the confusion.

Model NameYearReplacement Cost
Chevrolet Silverado 1500 HD2001-2002$966-$1180 for 33,000 miles
Chevrolet Silverado 2500 HD2001-2020$449-$2500 for 33,979 miles
Chevrolet Silverado 3500 HD2001-2022$1960-$2343 for 114,038 miles
Chevrolet Silverado 1500 HD2001-2002$872-$1066 for 21,000 miles
Chevrolet Silverado 1500 HD2005$946-$1156 for 1,47,000 miles

Now you can understand that each of the model’s replacement cost variations is different depending on the mileage it runs.

Sometimes it’s getting too high, or sometimes it decreases too low. This is the fact that makes the cost variations more complicated and uncertain. But thankfully, you can at least get an average idea of which replacement costs you need to pay by the following chart of the replacement cost in different cases.

Cost List Of Several CasesOil Pump Replacement Cost
For the new oil pumpIt ranges from $50-$150
Change or replace the oil pump gasketIt ranges from $150-$200
For oil and oil filter (new to old)The cost may up to $100-150 for a new oil pump; it increases up to 30-40% for the older one
Labor CostIt increases on an hourly basis; for 4-5 hours, you need to pay $200-$800

The cost of the Chevy 6.0 oil pump replacement time depends on its damages and age. If the oil pump got destroyed for any unforeseen issues, the charges might vary for this. Overall, the expenditure of changing or replacing the 6.0L engine’s oil pump is around $300-$2500, including all of these above phenomena and the labor cost.

3 Common Signs To Replace The 6.0 Engine Oil Pump

Knowing the nasty symptoms of an engine oil pump failure may bring a big disaster for you. Diagnosing these affairs is very crucial. Otherwise, it may affect the engine. Besides this, it will also increase the total oil pump replacement cost of the Chevy 6.0L engine since they relate to each other.

First, a bad engine oil failure often occurs due to the low oil pressure. Every vehicle oil pump comprises a pressure relief valve, which stops working or doesn’t open properly. It is the first sign of a bad engine oil pump.

Also Read: Where is the Fuel Pump on A 6.6 Duramax? – Reveal The Location, YES!

Second, engine temperature increases suddenly if the engine doesn’t get sufficient oil. A lack of low oil flow is the major problem of lousy oil pump issues.

Thirdly, if the engine oil pump gets damaged, it will often make an awkward sound. This sound may happen because of low temperature, lack of lubrication, and many more.

A Short But Quick Guide To Replace Chevy 6.0L Oil Pump

A 6.0L Chevy oil pump engine lasts approximately 60,000-70,000 miles if maintained properly. So if you have a clear concept to replace it, minor damage may occur. Here’s a short guide for this.

  • Lean your vehicle in a safe place, and open up the engine hood. Put a drain pan underneath the engine.
  • Remove the oil plug, and raise the vehicle height with a jack stand.
  • Unscrews some adjusted accessories from the pane, including pan bolt and rear-bearing screws, also discloses the old gasket.
  • Clean the engine blocks; it’s good if you’re applying some lubricants here.
  •  Find out the location of the oil pump using a manufacturer guide, remove it and install the new one similarly.
  •  Also, finish it by reinstalling all the separate parts one after one.

A Helpful Tutorial You May Need!

Frequently Asked Questions (FAQs)

Is the Oil Pump Worth Replacing?

Yes, it is worth replacing the oil pump if it worsens entirely. A bad oil pump is often considered the engine’s failure. Again, it will retain the vehicle to conduct thoroughly.

How Much Is It To Replace An Oil Pump On A 2005 Chevy Silverado?

To replace an oil pump on a 2005 Chevy Silverado is nearly the cost of its other models. The total cost may be around $956-$1150. Yet, it depends on the condition of the oil pump damages.

How Do You Change The Oil Pump On A 6.0 Chevy?

You can change the oil pump on a 6.0 Chevy on your own. All you need to understand is the exact location of the oil pump, which is probably situated inside the oil pans. After that, you need to separate the panes, gaskets, screws, and bolts from there, separate the older ones and re-attach all the parts again.


A Chevy 6.0 oil pump replacement cost may require some cash from you. Hence, the cost often relies on the engine damage; it is uncertain to predict the exact rate. But if you don’t want to replace them with any service holder, try to change it yourself.

You can reduce the cost by taking good care of your engine too. Good maintenance, proper lubrication, and refill of the oil tanks from time to time are the key to minimizing the hassle of replacing the fuel pump over time. After all, we all know that precautions are better than cures.

You Can Also Read:

Ronald Berit

Our chief editor, working 24/7 to ensure the precise and only quality data regarding different trucks.He is mastered with the ins and outs of cargo to off-road trucks of Dodge, Ford, Chevy, Toyota, GMC and more. This truck geek graduatedwitha Bachelor of automobile engineeringdegree and practiced through his own automotive parts repair center.

Similar Posts