|

6.7 Cummins Camshaft Position Sensor Location and How It Works?

Can’t find the 6.7 Cummins camshaft position sensor location? Don’t be upset. It’s placed in such a position on top of the cylinder that most of us have to struggle to find its location!

The camshaft position sensor detects the firing cylinder to assure synchronization with the fuel injector. The camshaft position sensor assists the ECM, the engine control module, to maintain the timing of ignition and fuel injection.

If the camshaft position sensor fails to perform, it may cause starting difficulty. Check the light and emergency mode of the control system.

It is wise to be familiar with your 2015 6.7 Cummins camshaft position sensor location and keep them in check to avoid and repair any damage.

6.7 Cummins Camshaft Position Sensor Location

Finding the 2012 6.7 Cummins camshaft position sensor location, just like the other Dodge models, is a bit tricky as it is not laid right in front of your eyes. You have to look deeper to find this sensor.

You can find the camshaft position sensor close to the engine. In most cases, it is attached to the top of the cylinder. It is often attached to the back of the timing cover.

When the camshaft is placed on the engine, it is easier to work on them.

Also Read: [Explained] 7.3 Powerstroke Sensor Location Diagram+Video Guide!

However, in 6.7 Cummins camshaft sensor is more on the inner side and quite hard to reach. You can see the 2012 6.7 Cummins crankshaft position sensor location by the balancer if you look from underneath the driver’s side. If you follow the small pipe attached to it, you will locate the camshaft position sensor. Removing some parts from the upper side will give you better access to the sensor.

The Job of the Camshaft Position Sensor

The main job of the camshaft position sensor is to confirm the position of the crankshaft drive working along with the crankshaft position sensor. This is the reason2006 dodge Cummins camshaft position sensor location is near and connected to the crankshaft position sensor.

These two sensors work together to signal the engine which cylinder is firing. So that the fuel injection is synchronized and the cylinders move in sequence to keep the engine going properly. It is important to collect all the pieces of information accurately as they affect the performance of the vehicle.

The camshaft sensor follows the Hall principle. The Hall voltage of the Hall IC changes as the ring gear turns, which sends a signal to the control unit to collect the necessary facts.

Problems you may face if the camshaft position sensor includes starting problem, check light, fuel injection problem, etc. In some cases, the engine control system will initiate the emergency mode. The worst scenario that can happen is the engine not starting.

To avoid such disasters, check the 2007 6.7 Cummins camshaft position sensor location for damage. Repair the camshaft position sensor or replace it if necessary.

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

Where is the crankshaft position sensor located?

The crankshaft position sensor is located at the bottom front part of the engine. If you look from underneath, you can see it at the driver’s side. 08 6.7 Cummins camshaft position sensor location is above the crankshaft position sensor.

Where is Cam sensor on 6.7 Cummins?

6.7 Cummins camshaft sensor is more on the inner side and quite hard to reach. You can see the crankshaft sensor by the balancer if you look from underneath the driver’s side. If you follow the small pipe attached to it, you will find the camshaft position sensor location. Removing some parts from the upper side will give you better access to the sensor.

Where is my crankshaft sensor?

The crankshaft sensor is usually at the bottom-front part of the engine. You can see it on the balancer. In some unusual cases, it can be at the back of the timing cover.

Can I replace crankshaft sensor myself?

Yes. You can replace the crankshaft sensor yourself. Actually, the replacement is quite easy. You just need to know the right way to replace them. If you’re not confident enough, ask for professional help.

Wrap Up

It is always a wise idea to know the whereabouts of the parts of your engine vehicle. Most of the parts are connected to each other, and damage to any part can affect the overall performance of your vehicle. That’s why it is important to know 6.7 Cummins camshaft position sensor location.

The camshaft and crankshaft position sensors keep the engine control system updated with the cylinder movement which helps to determine the synchronization of the fuel injectors.

2001 Dodge Cummins camshaft position sensor location might be a little hard to find as it is almost hidden behind the other parts. But with the help of this guide, now you can easily trace it and do the necessary adjustments.

You Can Also Read:

Ronald Berit

Our chief editor, working 24/7 to ensure the precise and only quality data regarding different trucks.He is mastered with the ins and outs of cargo to off-road trucks of Dodge, Ford, Chevy, Toyota, GMC and more. This truck geek graduatedwitha Bachelor of automobile engineeringdegree and practiced through his own automotive parts repair center.

Similar Posts