Know 6.0 Powerstroke Cylinder Numbers & Firing Order

The matter of determining 6.0 Powerstroke cylinder numbers was always confusing to those who have less to no idea on how engines work and deep internal parts of it, and that’s okay!

For some reason, if you are needing an explanation of those whole cylinder numbers of 6.0 Powerstroke thing, then we are glad to give you good news.

Today, we will walk you through the right method for determining the numbers in a simple way. Stick Till the End!

The 6.0 Powerstroke Cylinder Numbers Theory

Here’s the diagram that you need to have a look at first, for understanding, and then we can proceed to the explanation part.

To be able to determine any 6.0 Powerstroke cylinder contribution/balance fault you might need the numbers.

So, imagine you are facing the very front of your truck engine. And at this position, you should see an odd number of cylinders on your right side. And there should be an even number of cylinders on your left side. Now if you are standing behind the engine, then it’s absolutely true.

• The passenger side would have 1-3-5-7 that starts from the front towards the back.
• And for the drive side, you should again see it going from front to back while numbering would be 2-4-6-8.

And now you know how to determine cylinder number. 

A Bit on How Ford Numbering Works

Here’s what you should do for determining the numbering according to Ford.

Keep in mind that the cylinders are numbered from each side going from front to back.

• Look at the engine.
• Now you want to determine your left-hand side cylinder that is the closest.
• This would be the number 1 cylinder.
• Then you want to follow the pattern and find 2,3,4 cylinders.
• Have a look at the right-hand side for the closest cylinder after this.
• The closest one would be 5 number cylinders.
• Keep moving along the line and you should be able to note 6,7 and 8 cylinders.

The 6.0 Powerstroke Firing Order

Now you might be looking for the 6.0 Powerstroke cylinder numbers in firing order. If that’s the case, then here are a few things you need to know.

• Not all the cylinders would fire at the same time.
• There’s a predetermined rotation that the cylinder follows for firing each when it’s the turn.
• And this does not follow the cylinder numbering routine.

So, as you can see, we need the right firing order for the cylinders this time. Here’s how to determine that.

• The firing order would have cylinder 1 on the right side.
• And then it shall pass over to 3,5 and 7 cylinders.
• Then for the left side, it will pass over to 2, 4, 6, and finally 8 number cylinders.

Keep In Mind – The firing order sometimes varies based on the model one is talking about. And that is why you should always refer to the owner’s manual for understanding the correct firing order.

This Video Will Help You Too!

Frequently Asked Questions (FAQs)

Wrapping Up

So, we covered the explanation to 6.0 Powerstroke cylinder numbers in a few ways along with answering some questions about this certain area. Hopefully, that was enough to give you some good insight into what you’ve been looking for.

You can also check the manual provided for more specific information on this topic. However, if you’ve lost the manual, consulting with a professional can also help.

But we hope, you don’t have to do that after reading this guide. On That Note, We’ll Be Leaving for Today!

You Can Also Read:

• How Much Does It Cost to Bulletproof A 6.0 Powerstroke?
• Not Sure About Ford F250 Tail Light Wire Colors? (Now You Will!)
• All About DTE Calculation – A Wholesome Guide You Need!